SERCK AUDCO 735 SIZE G SEALANT STICKS (Box of 6)

SERCK AUDCO 735 SIZE G SEALANT STICKS (Box of 6)

Part No :  LUSA0228

STICK SIZE    29 x 100mm

**** Minimum Order Quantity 3 x Boxes *****

Current Availability 5 weeks from receipt of order

Audco Sealants are high viscosity fluids, specially produced to seal and lubricate plug 
valves. Only Audco sealants should be used in Audco valves unless authorised by SAV. 
The use of a wrong sealant or commercial greases not recommended by us can impair 
the good functioning of the Valve and in the worst case seize it completely. 
Sealant is injected into the Super-H to ensure valve tight shut off and maintain 
low torque. Audco sealants have excellent lubricating properties and great 
film strength, they supplement Super LoMu treatment to reduce friction 
between the seating surfaces and provide a very effective seal even at higher 
line pressures. 
Sealants shall be selected based on service media and operating temperature, 
the tables below summarise our general sealant recommendations. Sealant 
shall be carefully selected since the use of the correct Audco Sealant will 
minimize injection frequency. The tables are self-explanatory, however, if in 
doubt on sealant selection, Serck Audco can suggest a suitable sealant against 
service details. 
Multi-Purpose Sealants 
Serck Audco Valves research laboratories have paid great attention to the development of multi-purpose sealants to 
simplify plant maintenance where many services are encountered. As a result of this research, we are able to offer 
three sealants which cover a very wide variety of services and have replaced many of the older Audco sealants. A 
single multi-purpose Audco sealant can often be used throughout an entire plant, often handling a variety of fluids. 
This simplifies maintenance and reduces the number of sealants which need to be kept.