SERCK AUDCO 591 SIZE C SEALANT STICKS (40 sticks per tin)

SERCK AUDCO 591 SIZE C SEALANT STICKS (40 sticks per tin) ***********Current availability 2-3 weeks from receipt of order ************* Recommended for Petroleum based heat transfer oils. Hot fuel oil to 120C ****************MINIMUM ORDER QUANTITY 10 TINS ****************** Audco Sealants are high viscosity fluids, specially produced to seal and lubricate plug valves. Only Audco sealants should be used in Audco valves unless authorised by SAV. The use of a wrong sealant or commercial greases not recommended by us can impair the good functioning of the Valve and in the worst case seize it completely. Sealant is injected into the Super-H to ensure valve tight shut off and maintain low torque. Audco sealants have excellent lubricating properties and great film strength, they supplement Super LoMu treatment to reduce friction between the seating surfaces and provide a very effective seal even at higher line pressures. Sealants shall be selected based on service media and operating temperature, the tables below summarise our general sealant recommendations. Sealant shall be carefully selected since the use of the correct Audco Sealant will minimize injection frequency. The tables are self-explanatory, however, if in doubt on sealant selection, Serck Audco can suggest a suitable sealant against service details. Multi-Purpose Sealants Serck Audco Valves research laboratories have paid great attention to the development of multi-purpose sealants to simplify plant maintenance where many services are encountered. As a result of this research, we are able to offer three sealants which cover a very wide variety of services and have replaced many of the older Audco sealants. A single multi-purpose Audco sealant can often be used throughout an entire plant, often handling a variety of fluids. This simplifies maintenance and reduces the number of sealants which need to be kept.