AZTEC WATER GLYCOL HYDRAULIC FLUID HFC 46 x 20 litres FIRE RESISTANT HYDRAULIC FLUID
AZTEC WATER GLYCOL HYDRAULIC FLUID HFC 46 x 20 litres
FIRE RESISTANT HYDRAULIC FLUID
(FIRE003)
Product Description
A water based hydraulic fluid for use in hazardous environments where leakage of conventional oil based, pressure transfer media would present a serious fire hazard. The viscosity meets typical ISO 46 requirements and can therefore be used in a wide variety of hydraulic equipment.
Benefits:
• Excellent Fire Resistance.
• Excellent Lubricity.
• Excellent anti-wear and anti-corrosion properties.
• Compatible with multiple seal types, including synthetic rubber and packings such as Butyl, EPR, Viton, Teflon, Nylon, Silicone, Buna, Neoprene and Natural Rubber.
£132.44
SKU
FIRE003
- Buy 2 for £121.99 each and save 8%
- Buy 5 for £111.53 each and save 16%
- Buy 10 for £104.56 each and save 21%
AZTEC Water Glycol Hydraulic Fluid HFC 46 x 20 litres
FIRE RESISTANT HYDRAULIC FLUID
Product Code: FIRE003 - Revision: 20190723
Product Description
A water based hydraulic fluid for use in hazardous environments where leakage of conventional oil based, pressure transfer media would present a serious fire hazard. The viscosity meets typical ISO 46 requirements and can therefore be used in a wide variety of hydraulic equipment.
Benefits Applications
• Excellent Fire Resistance.
• Excellent Lubricity.
• Excellent anti-wear and anti-corrosion
properties.
• Compatible with multiple seal types, including
synthetic rubber and packings such as Butyl, EPR,
Viton, Teflon, Nylon, Silicone, Buna, Neoprene
and Natural Rubber.
Typical applications are, pressure diecasting
machines, injection moulding machines,
furnace tilting equipment, forging and
extrusion presses, welding plant fixtures,
regulators and controls, glass forming
machines, ingot manipulators, fork lift trucks
and cranes. Suitable for use with a variety of
seals and paints and coatings.
Not suitable where cadmium or zinc coatings
(unless passivated) and aluminium should be
hard anodised. Aluminium rubbing contacts
should be avoided.
When converting from alternative hydraulic
fluids full flushing of the system is advised.
For further information on flushing and
compatibility issues contact your local sales
representative.
Typical Test Data Product Profile
Appearance - Pink
Density @ 15°C - 1.08
Kinematic Viscosity @ 40°C (cSt) - 46
pH - 9.4
Pour Point (°C) - -50
Manufacturer | Aztec |
---|---|
Weight | 20.000000 |
Country of Manufacture | United Kingdom |
Write Your Own Review