BUY CASTROL Aircol CM150 x 20 litres

BUY CASTROL Aircol CM150 x 20 litres. Castrol Aircol CM oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. Aircol CM grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Aircol CM compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation however as a general guide Aircol CM 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol CM 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol CM 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol CM range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol CM is classified as follows: DIN 51506 classification - VDL ISO 6743/4 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors Aircol CM meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer. Manufacturer's Pt. No. 141707 PLEASE ALLOW 7 DAYS FOR DELIVERY