BUY ANDEROL PQAA 150 x 5 litres
BUY ANDEROL PQAA 150 x 5 litres
£93.61
SKU
andpqaa2505
- Buy 2 for £81.92 each and save 12%
- Buy 4 for £70.21 each and save 25%
BUY ANDEROL PQAA 150 x 5 litres
ANDEROL PQAA-150 is a white oil based H1 registered lubricant, combined with high performance additives. They are designed to provide outstanding lubrication protection to gear sets, bearings and pump in applications in the Food Industry.
Anderol PQAA range is available in the grades ISO VG 150, 220, 320, 460, 680 & 1000.
ANDEROL PQAA-150 is NSF/H1 registered. The product is certified Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATIONS
Product was developed with highly stable white oil.
Product has excellent wear and load carrying capacity.
Rust and oxidation inhibited.
Good water separation.
ANDEROL white oil based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and hoses. No special precautions related to compatibility are required when changing over from a mineral oil lubricant
to this product.
H1 Food Approved gear lubricant suitable for food manufacturing applications where incidental food contact may occur.
Recommended for use in:
Chain lubrication
Bearings and gears
Wipe down oil
Worm gear applications
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Groot Egtenrayseweg 23
5928 PA VENLO
The NETHERLANDS
Tel No.: +31 (0)77 396 03 40
Fax No.: +31 (0)77 396 03 49
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by
ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemic ally qualified lab technicians should carry out tests. Before using any
chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL PQAA 150
Appearance @ 20°C
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Total Acid Number, mg KOH/g
Flash Point, °C
Pour Point, °C
Demulsibility @ 54°C,min
Four ball wear,1200 rpm,75
Weight | 10.000000 |
---|---|
Manufacturer | Anderol |
Country of Manufacture | Netherlands |
Write Your Own Review