AZTEC MIRACOR 640 W x 205 litres
AZTEC MIRACOR 640 W x 205 litres
(RUS017)
Product Description
A medium-term rust preventative designed to be diluted with water to form an emulsion when in use. The Emulsion leaves a thin oily film on the component following the evaporation of the water from the emulsion.
The concentrate is formulated from mineral oil, film forming agents and corrosion inhibiting additives.
Ideal for inter-operational protection of iron, steel and aluminium components.
Benefits:
• Solvent free so reduced fire risk.
• Cost effective.
• Excellent corrosion protection.
• Versatility of adjusting the concentration.
£690.10
SKU
RUS017-1
- Buy 2 for £662.21 each and save 4%
- Buy 4 for £627.36 each and save 9%
AZTEC MIRACOR 640 W x 205 litres
Product Code: RUS017 - Revision: 20190715
Product Description
A medium-term rust preventative designed to be diluted with water to form an emulsion when
in use. The Emulsion leaves a thin oily film on the component following the evaporation of the
water from the emulsion. The concentrate is formulated from mineral oil, film forming agents
and corrosion inhibiting additives.
Ideal for inter-operational protection of iron, steel and aluminium components.
Benefits Applications
• Solvent free so reduced fire risk.
• Cost effective.
• Excellent corrosion protection.
• Versatility of adjusting the concentration.
It is recommended to dilute the
concentrate in water to approximately
10 to 20%. Warming the water before
mixing will improve mixing. It is advised
to avoid using extremely hard water as
this may affect performance.
Can be applied by flooding, dipping,
brush or spray. Increasing temperatures
up to 55°C will accelerate drying and help
to limit bacterial growth.
Residual film can be removed by
common hydrocarbon solvents or alkali
cleaners.
Typical Test Data
Appearance - Brown liquid
Drying time (hours) - 2
Film Type - Greasy/ oil
Flash Point (°C) - >150
Film Thickness (μm) - ̴1
Indoor Protection (months) - 8
Kinematic Viscosity @40°C (cSt) - 80 (5 as an emulsion)
pH (10% solution) - 9
Solubility in water (10 to 20%) - Milky emulsion
Manufacturer | Aztec |
---|---|
Weight | 200.000000 |
Country of Manufacture | United Kingdom |
Write Your Own Review