BUY Kluber Klubersynth GH6-80 x 20 litres

BUY Kluber Klubersynth GH6-80 x 20 litres Klübersynth GH 6 oils - Synthetic gear and high temperature oils. DESCRIPTION: Klübersynth GH 6 oils are gear oils on a polyglycol basis. They have a high scuffing load capacity and micro-pitting resistance. These oils have also proved their good wear protection in rolling bearings on the FAG FE 8 test rig for gear oils. Klübersynth GH 6 oils stand out for their excellent ageing and oxidation resistance, good viscosity-temperature behaviour and very good thermal stability. BENEFITS for your application: • The oils meet the requirements according to DIN 51 517 – 03, CLP. Corresponding gears can be switched to Klübersynth GH 6 oils without prior consultation with the gear manufacturer provided the general application notes are observed. • As of ISO VG 220 the scuffing load stage API GL 5 is achieved. Gears are sufficiently protected against scuffing even under high peak loads. • Much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the base oil; thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible • Owing to the wide service temperature range a single viscosity grade can cover both low and high temperatures in many applications • The optimum friction behaviour of the polyglycol base oil reduces power losses and improves efficiency • The good wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved • The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures • Seals made of 72 NBR 902, 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth GH 6 oils. Leakage and contamination are prevented. • Approved by Flender, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebstechnik, Bonfiglioli, Rossi Motoriduttori, Motovario, Moventas, etc. APPLICATION: Klübersynth GH 6 oils were especially developed for the lubrication of worm gears with steel/bronze pairings. The polyglycol base oils and special additives reduce the friction coefficient and provide low wear values, which is a clear advantage in these applications. Klübersynth GH 6 oils achieve a particularly low wear intensity according to DIN 3996 (calculation of load capacity of worm gears). Klübersynth GH 6 oils are also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of denture couplings, especially when exposed to high temperatures. Klübersynth GH 6 oils can also be used for the lubrication of lifting, drive and transport chains.