BUY CASTROL Brayco Micronic SV/3 x 20 litres

BUY CASTROL Brayco Micronic SV/3 x 20 litres Synthetic subsea production control fluid Description Castrol Brayco Micronic™ SV/3 is a synthetic hydrocarbon control fluid specifically formulated for use as the control medium in closed loop surface and subsea production control systems.

The fluid incorporates all the features required for operation throughout the control system including Sub Surface Safety Valves (SSSV) and intelligent well completions. Brayco Micronic SV/3 has been developed and qualified under a Quality Management System with ISO 9001:2000 Certification and an Environmental Management System with ISO 14001:2004 Certification for Research and Development.

Qualification testing was carried out in accordance with ISO 13628-6 Annex C (2006 E) requirements Application Designed for use in all conventional and high pressure, high temperature applications (according to API 17 TR8). Can operate over a temperature range of -40ºC (-40ºF) to 200ºC (392ºF). Suitable for use within Electro-Hydraulic Multiplex (EH-Mux) or direct hydraulic control systems. Designed for use throughout the entire production and workover control systems, covering Topsides and Subsea applications: both open water and well bore; and Downhole from control of a single SSSV through to complex intelligent well completions. Advantages Fully compliant with OSPAR environmental legislation and does not contain any “substitutable” components. Environmental testing has been completed for compliance in other geographies. Has field proven performance, with an operating capability up to 200ºC (392ºF).

Maintains corrosion performance with seawater contamination. Tolerant of the high well temperatures encountered by those parts of the control system located at the well bore. Fully compatible and miscible in all proportions with other products in the Castrol Brayco Micronic Subsea range.

Compatible with a wide range of materials commonly used in subsea control systems (see Tables 3 & 4). More detailed compatibility information is available on request. Page: 1/6 Typical Physical Characteristics Table 1 Fluid - Castrol Brayco Micronic SV/3 Rheology @ Ambient Pressure Property @ units -25ºC (-13ºF) 0ºC (32ºF) 20ºC (68ºF) 40ºC (104ºF) 100ºC (212ºF) 175ºC (347ºF) Density g/ml 0.8437 0.8271 0.8137 0.8004 0.7604 0.7104 lb/ft3 52.67 51.63 50.80 49.97 47.47 44.35 Viscosity mm2/s 144.92 40.05 18.93 10.54 3.26 1.43 Bulk Modulus N/m2 (x 109) 1.67 1.48 1.34 1.20 0.84 0.46 psi (x 105) 2.43 2.15 1.94 1.75 1.21 0.67 General Properties Property Code Units Typical value Appearance Clear mobile liquid Colour Pale amber Pour Point ISO 3016 / ASTM D97 ºC (ºF) <-50 (<-58) Flash Point - closed cup method ISO 2719 / ASTM D93 ºC (ºF) 150 (302) pH @ 20ºC (68ºF) N/A as oil based fluid Acid Number ISO 6619 / ASTM D664 mg KOH/g 0.4 Base Number ISO 3771 / ASTM D2896 mg KOH/g 1.3 Coefficient of Thermal Expansion ASTM D1903 ºC-1 0.00111 Thermal Conductivity ASTM D2717 W/mºC - Specific Heat ASTM D2766 kJ/Kg°C - Foam Sequence 1 - tendency / stability ISO 6247 / ASTM D892 ml / ml 50 / 0 Viscosity Index ISO 2909 / ASTM D2270 - 270 Water Content - Karl Fischer test (coulometric test) ISO 6296 / ASTM D1744 ppm <300 Relative Humidity CWS01 % <37.5 Particulate Cleanliness SAE AS4059F Class 6.

The above figures are typical of those obtained with normal production tolerance and do not constitute a specification. Detailed Pressure/ Viscosity/Temperature (PVT) data available on request. Page: 2/6 Table 2 Fluid - Castrol Brayco Micronic SV/3 Typical Performance Characteristics Property Code Performance Seawater Stability ISO 13628-6 Annex C (2006 E) Provides anti corrosion performance on carbon steel with up to 10% seawater. Lubrication Shell 4 Ball - Mean Wear Scar Diameter (1hr, 30 kg, 1460 rpm) IP239 0.4 mm typical Environmental Performance OSPAR Requirements Meets OSPAR requirements - all components tested for toxicity, biodegradation and bioaccumulation. Compatibility Metals ISO 13628-6 Annex C (2006 E) Compatible with a wide range of metals. For a core set of commonly used metals see Table 3. Elastomers / Plastics ISO 13628-6 Annex C (2006 E) Compatible with a wide range of elastomers/plastics. For a core set of commonly used compounds see Table 4. Umbilical Testing API 17E 3 month compatibility testing completed successfully. Valve Testing DCV OEM specific Qualified by a number of leading DCV manufacturers. SSSV OEM specific & OTO99001 Qualified by a number of leading SSSV manufacturers