BUY SHELL GadusRail S3 EUDB x 50 kgs

BUY SHELL GadusRail S3 EUDB x 50 kgs

BUY SHELL Tegula V32 x 20 litres

BUY SHELL Tegula V32 x 20 litres

KLUBER BARRIERTA L25 DL x 1 kg

KLUBER BARRIERTA L25 DL x 1 kg Special lubricating grease for the lubrication of sensitive plastics and elastomers
£2,163.93
SKU
kluberbarriertal25dlx1kg
  • Buy 4 for £2,067.05 each and save 4%
  • Buy 12 for £1,901.83 each and save 12%
KLUBER BARRIERTA L25 DL x 1 kg Special lubricating grease for the lubrication of sensitive plastics and elastomers Your requirements – our solution BARRIERTA L 25 DL is based on perfluorinated polyether oil and PTFE and thus resistant to many media such as water or hydrocarbons. Do you need to attain low friction coefficients in elastomer/metal or plastic/plastic friction points over a long time and across a wide temperature range? ..... BARRIERTA L25 DL can help you keep friction low even at temperatures of -25 °C, especially when lubricating door seals, for example in train doors. This will enable you to meet requirements for low pressure variations in trains going through tunnels and constant actuating forces for doors over a wide temperature range. Do your customers expect a long service life of seals, even if they are frequently exposed to direct sunlight? ..... BARRIERTA L25 DL absorbs some of the sunlight's UV radiation, keeping the seal pliant for longer. Do you need a lubricant that is compatible with sensitive materials?..... Field experience has shown the product's good compatibility with many sensitive plastic materials such as PC, or with elastomers such as EPDM. Do you have optical applications requiring a lubricant that does not form a condensate on lenses? With the low vapour pressure of its base oil, BARRIERTA L25 DL offers what it takes to prevent the formation of condensates. Application BARRIERTA L25 DL is preferably used for lubricating seals in train doors. It has also been used as a special lubricant for optical equipment for many years. Application notes Seals in train doors should be free from impurities prior to initial lubrication. For use in precision optics, we recommend cleaning the friction point prior to initial application first with white spirit 180/210 and then with Klüberalfa XZ 3-1. Then blow the surfaces with clean, dry compressed air or hot air to remove solvent residues. For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination.
More Information
Weight 10.000000
Manufacturer Kluber
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account