AZTEC BIO MARINE TWO STROKE OIL TC-W3 x 5 litres (Box of 4)
AZTEC BIO MARINE TWO STROKE OIL TC-W3 x 5 litres (Box of 4)
(MAR011)
Product Description
A high quality biodegradable two stroke engine oil, formulated to meet the demands of the U.S.A. National Marine Manufacturers Association NMMA TC-W3. Developed for high performance water cooled outboard two stroke spark ignition.
The stringent performance levels demanded of this specification supersede those of NMMA TC-W2, the former boating industry association (BIA) TC-W, and the former API TSC-4, and can be used where these classifications are specified.
Benefits:
• Developed for both oil injection and pre-mix systems up to 50:1.
• Powerful detergent system helps to keep components clean.
• High lubricity, power protection formula gives superior protection against piston seizure, even at high temperatures when tested with very low oiling rates.
£210.88
SKU
MAR011-3
- Buy 2 for £201.29 each and save 5%
- Buy 5 for £191.69 each and save 9%
- Buy 10 for £176.36 each and save 16%
AZTEC Bio Marine Two Stroke Oil TC-W3 x 5 litres (Box of 4)
Product Code: MAR011 - Revision: 20181207
Product Description
A high quality biodegradable two stroke engine oil, formulated to meet the demands of the U.S.A.
National Marine Manufacturers Association NMMA TC-W3. Developed for high performance water
cooled outboard two stroke spark ignition.
The stringent performance levels demanded of this specification supersede those of NMMA TC-W2,
the former boating industry association (BIA) TC-W, and the former API TSC-4, and can be used
where these classifications are specified.
Benefits Applications
• Developed for both oil injection and pre-mix
systems up to 50:1.
• Powerful detergent system helps to keep
components clean.
• High lubricity, power protection formula gives
superior protection against piston seizure, even at
high temperatures when tested with very low
oiling rates.
A bio marine two stroke oil with a
broad spectrum performance that
can be used in the majority of two
stroke applications. In all cases the
engine manufacturers fuel/oil ratios
should be adhered to, in pre-mix
applications.
Typical Test Data Product Profile
Density @15°C - 0.92
Flash Point (°C) - >80
Kinematic Viscosity cSt @ 100°C - 8.7
Kinematic Viscosity cSt @ 40°C - 51.6
Pour Point (°C) - <-25
Total Base Number (mg KOH/g) - 8.0
Viscosity Index - 147
NMMA TC-W3
Manufacturer | Aztec |
---|---|
Weight | 20.000000 |
Country of Manufacture | United Kingdom |
Write Your Own Review