TEXACO METAL PROTECTIVE OIL L x 208 litres
TEXACO Metal Protective Oil L x 208 litres
High performance mineral based preventive oil in combination with a range of additives, including rust and corrosion inhibitors, designed to provide a thin,
tight, protective film over steel components in storage or transit.
£891.37
SKU
4020087
- Buy 2 for £839.28 each and save 6%
- Buy 4 for £781.40 each and save 12%
TEXACO Metal Protective Oil L x 208 litres
Metal Protective Oil L is a high performance mineral based preventive oil in combination with a range of additives, including rust and corrosion inhibitors, designed to provide a thin, tight, protective film over steel components in storage or transit.
Customer benefits:
• Provides robust protection of steel components in storage or transit
• Prevents coloured ring formation in long-term storage of rolled or stacked steel
• Resistant to red or white rust
• Long term oxidation protection
• Non-stick, non-greasy surface prevents sticking between steel sheets
• Non-stick surface prevents dust and contamination sticking to steel surfaces
• Will not change the natural appearance of protected steel surfaces
• Easily removed with solvents or alkaline cleaners
Applications:
• Metal Protective Oil L can be applied directly with a brush, by spraying or by immersion. If a very thin oil film is required, the oil may be heated to 50°C
• Metal Protective Oil L does not contain solvents, but it can be diluted by up to 10 % to make it more fluid. Heating is not required. When diluted, it exhibits penetrating effects and can be used as a penetrating oil
• Note: Metal Protective Oil L should never be applied to dirty and/or wet surfaces. Only apply the coating to clean surfaces and use a water repellent product to remove water or emulsion from the surface
Performance:
• JIS K 2246 (NP-8) Lubricating Oil Type RPO
Weight | 200.000000 |
---|---|
Manufacturer | Texaco |
Part Number | 4020087 |
Write Your Own Review