AZTEC MIRACOOL 600 AAL x 205 litres
AZTEC MIRACOOL 600 aal x 205 litres
(SOL042)
Product Description
A high-performance, water-soluble cutting fluid specifically formulated to address staining problems encountered when conventional fluids are used in machining aerospace aluminium alloys (2000, 5000, 6000 and 7000 series).
Metalworking fluids contain a biocide, which is a chemical used to control the growth of bacteria and other microbes that may infect metalworking fluids during use. Bacteria and microbes cause foul smells, corrosion, lower the pH and present a health risk if not controlled properly in the metalworking emulsion. The most common biocide traditionally used slowly released ‘formaldehyde’ into the metalworking emulsion to control the microbe concentration. Within the European Union the substance ‘formaldehyde’ has been reclassified under the REACH regulations and this has resulted in some of the Miracool range of products requiring additional CLP labelling, “H350 – May cause cancer”. Aztec Oils have redeveloped these products to remove the formaldehyde releasing biocide and in turn the required labelling.
Benefits:
• Formaldehyde, chlorine and nitrite free.
• Excellent corrosion protection and bactericidal properties.
• Low foaming/scum formation.
• Improves machine tool cleanliness and surface finish.
• Extends tool life and increases part quality.
• Free of chlorine and sulphur.
• Compatible with ferrous metals and aluminium alloys.
£776.36
SKU
SOL042-1
- Buy 2 for £744.99 each and save 4%
- Buy 4 for £705.78 each and save 9%
AZTEC Miracool 600 aal x 205 litres
Product Code: SOL042 - Revision: 20191121
Product Description
A high-performance, water-soluble cutting fluid specifically formulated to address staining
problems encountered when conventional fluids are used in machining aerospace aluminium alloys
(2000, 5000, 6000 and 7000 series).
Benefits Applications
• Formaldehyde, chlorine and nitrite free.
• Excellent corrosion protection and bactericidal
properties.
• Low foaming/scum formation.
• Improves machine tool cleanliness and surface
finish.
• Extends tool life and increases part quality.
• Free of chlorine and sulphur.
• Compatible with ferrous metals and aluminium
alloys.
Suitable for use in a variety of high
speed machining tasks including
milling, turning, drilling, reaming
and tapping operations and
broaching operations.
Aztec Oils provide a range of high quality
industrial cleaning solutions and rust
preventatives. For more information and to
ensure your equipment is protected,
contact your Sales Manager today.
Typical Test Data Product Profile
Appearance (neat) - Straw to light brown
Appearance (emulsion) - Opaque/ Translucent
Corrosion Test I.P.287 (%) - <3.0
pH (5%) - 9.5
Refractive Index - 1.0
Water Range 50-300 ppm CaCO3
Broaching 8-10%
Drilling 5-8%
General Machining 4-6%
Reaming & Tapping 7-10%
Application suitability: Best | Better | Good | Please consult Aztec Oils if unsure
Cast Iron
Low-medium
alloyed steel
High alloyed -
stainless steel
Aluminium
alloys
Magnesium
alloys
Yellow
metals
Grinding
General Machining
Drilling
Reaming, Tapping
Broaching
Manufacturer | Aztec |
---|---|
Weight | 200.000000 |
Country of Manufacture | United Kingdom |
Write Your Own Review