AZTEC ANTIFREEZE REGULAR CL01 x 205 litres
AZTEC ANTIFREEZE REGULAR CL01 x 205 litres
(WIN006)
Product Description
A high performance, concentrated, universal, engine coolant. Provides protection against freezing and corrosion down to -36°C,at a 50% dilution. Provides protection for a wide range of metals prolonging the life of your radiator, pumps, the block itself and the entire engine cooling system.
Nitrite, amine, and phosphate free Mono-ethylene Glycol based engine coolant formulated to meet the requirements of BS6580.
Benefits:
• Conforms to BS6580.
• Lasts up to 2 years in service (50%).
• Universal antifreeze/coolant.
• Excellent corrosion protection on cast iron, aluminium, copper alloys and solder.
• Suitable for year-round use.
• Nitrate, amine and phosphate (NAP) free.
£373.27
SKU
WIN006-1
- Buy 2 for £358.64 each and save 4%
- Buy 4 for £351.32 each and save 6%
AZTEC ANTIFREEZE Regular CL01 x 205 litres
Product Code: WIN006 - Revision: 20191111
Product Description
An engine coolant concentrate (antifreeze) based on mono-ethylene glycol, containing no nitrites,
amines or phosphates (NAP free).
Benefits Applications
• Thermal characteristics that permit effective
engine cooling without boiling.
• Anticorrosion protection of all metals and alloys
used in the cooling system of modern vehicles.
• Protection against frost, depending on the
concentration chosen.
• Compatibility with rubber and plastics used in
the cooling system.
• Excellent antifoaming characteristics.
• Meets most International and European
Standards.
Concentration (% Vol) H2O (vol %) Freeze Protection (°C)
33 67 -20
50 50 -40
67 33 -70
Suitable for use in petrol and diesel engines.
Provides all year round as an engine coolant
or antifreeze.
Recommended to use deionised or
demineralised water for dilution, although
other water types can be used.
Shelf life of at a minimum of two years when
stored in air tight containers at a maximum
temperature of 30°C. Translucent containers
should not be stored outside in direct
sunlight. Use of galvanised steel is not
recommended for pipes or parts of storage or
mixing installations.
Disposal of used or unused coolant see SDS
for further information.
Typical Test Data Product Profile
Appearance - Blue Liquid
Boiling Point (°C) - 169
Density (@ 15°C) - 1.125
Freezing Point (50% v/v H2O) (°C) - <-37
pH (50% v/v H2O) - 8.9
Reserve Alkalinity (ml HCl N/10) 21.5
Water Content (% wt) - 3.8
Foaming Characteristics (@ 88°C)
Height (ml) - 35
Breaktime (Seconds) - 2
BS 6580:2010
Manufacturer | Aztec |
---|---|
Weight | 200.000000 |
Country of Manufacture | United Kingdom |
Write Your Own Review