BUY KLUBER AMBLYGON TA 15-2 x 400 gms (Box of 12)

BUY KLUBER AMBLYGON TA 15-2 x 400 gms (Box of 12) Special grease for long-term lubrication and high temperatures AMBLYGON TA 15-2,Prod. 020109,en Edition 09.02.2021 [replaces edition 05.10.2020] Benefits for your application – Versatile grease for many applications subject to high loads – Long service life even when exposed to high temperatures or aggressive media – Long service life due to the high resistance to water and water vapour – Long service life due to the excellent adhesion to the friction points – Improved sealing effect due to high adhesion – Low maintenance due to good corrosion protection Description KLUBER AMBLYGON TA 15/2 is a long-term and high-temperature lubricating grease based on mineral oil and polyurea. This lubricating grease is used for long-term or lifetime lubrication in the machine-building sector covering a wide service temperature range up to 150 °C. KLUBER AMBLYGON TA 15/2 offers : good adhesion, resistance to hot and cold water and diluted alkaline and acid solutions. KLUBER AMBLYGON TA 15/2 is resistant to oxidation and ageing and protects against corrosion. Application AMBLYGON TA 15/2 lubricates bearings and joints subject to high temperatures and loads, for example in : – conveyors – kilns (rotary tubular kilns) – water pumps – hot rollers – tarmac laying machines – gate valves – seals – washing machines and dishwashers – impact mechanism in power tools – joints, hinges – king pins KLUBER AMBLYGON TA 15/2 is also used in combination with mineral oil-resistant elastomer seals. Pack sizes AMBLYGON TA 15/2 Tube 45 g + Can 1 kg + Bucket 25 kg + Product data AMBLYGON TA 15/2 Article number 020109 Chemical composition, thickener polyurea Chemical composition, type of oil mineral oilAMBLYGON TA 15-2 Special grease for long-term lubrication and high temperatures Product information Product data AMBLYGON TA 15/2 Lower service temperature -20 °C / -4 °F Upper service temperature 150 °C / 302 °F Density at 20 °C approx. 0.93 g/cm³ Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 220 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 18 mm²/s Worked penetration, DIN ISO 2137, 25 °C, lower limit value 285 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 315 x 0.1 mm Speed factor (n x dm) approx. 350 000 mm/min Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C <= 1 400 mbar Oil separation, DIN 51817 N, after 7 d/40 °C <= 5 % by weight Drop point, DIN ISO 2176, IP 396 >= 220 °C Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating 0 - 90 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months.