BUY CASTROL Braycote Inertox 2 x 1 kg
BUY CASTROL Braycote Inertox 2 x 1 kg
**** Formerly Castrol Inertox Heavy ****
£511.76
SKU
159F74
BUY CASTROL Braycote Inertox 2 x 1 kg
Castrol Braycote Inertox 2 is a chemically and thermally stable high temperature fully synthetic grease.
Application:
Designed for universal long-term application in anti-friction and plain bearings under hostile ambient conditions. Inert to most corrosive and/or other aggressive media.
For rolling and sliding bearings with extended re-lubrication intervals, high temperatures or under hostile ambient conditions such as in:
• paint drying lines
• film stretching machines
• tenter frames for textiles
• oven carriages in the ceramics industry
For lubrication of seals and friction points inside high vacuum chambers, such as found in the electronics industry.
Temperature application range: -25ºC to +260ºC (at higher operating temperatures adequate ventilation must be ensured).
Benefits:
• Excellent thermal and chemical stability – ensures the grease can operate in adverse applications and is
resistant to:
- hot and cold water, oils, oil-in-water emulsions
- inorganic and organic acids, alkaline solutions
- solvents based on hydrocarbons, e.g. naptha, benzene, toluol, paraffin etc.
- solvents based on chlorinated hydrocarbons, e.g. trichloroethylene (TRI), perchloroethylene (PER),
- dichloromethane (methylene chloride) etc.
- alcohols, ketones (acetone), halogens
- radioactive radiation (gamma rays)
• High wear protection, excellent lubricating capabilities, good load carrying capacity, outstanding pressure resistance
- leads to longer bearing life, extended lubrication cycles and uninterrupted service
• Extremely low evaporation loss in vacuum systems- ensures continual lubrication
• Non-flammable – grease can be exposed to extreme conditions ensuring safe use
• Good corrosion protection – helps prevent rust and oxidation on metal surfaces
Manufacturer's Pt. No. 159F74
Weight | 1.000000 |
---|---|
Manufacturer | Castrol |
Write Your Own Review