AZTEC HAMMER GREASE x400 gms (Box of 36)
AZTEC HAMMER GREASE x400 gms (Box of 36)
Product Description
Specially developed using a blend of semi-synthetic base oil manufactured with high temperature thickener containing a high level of graphite to extend lubrication periods. It is designed particularly for hydraulic hammer lubrication, pin and bush type of applications, on large earth moving and general off-road heavy plant machinery. Enhanced by the addition of laminar lubricating solids, and it’s adhesive properties resist water wash off. This product has also found use in the lubrication of open gears.
Benefits:
• High degree of water resistance.
• Reduced leakage tendency.
• Excellent load carrying capability and shock load resistance.
• Good sealing properties in dusty conditions.
• Inherent adhesive nature.
£136.07
SKU
GRE/H
- Buy 2 for £127.29 each and save 6%
- Buy 5 for £118.20 each and save 13%
- Buy 10 for £109.11 each and save 20%
AZTEC HAMMER GREASE x400 gms (Box of 36)
Product Code: GRE/H- Revision: 20190710
Product Description
Specially developed using a blend of semi-synthetic base oil manufactured with high temperature thickener containing a high level of graphite to extend lubrication periods. It is designed particularly for hydraulic hammer lubrication, pin and bush type of applications, on large earth moving and general off-road heavy plant machinery.
Enhanced by the addition of laminar lubricating solids, and it’s adhesive properties resist water wash off.
This product has also found use in the lubrication of open gears.
Benefits Applications
• High degree of water resistance.
• Reduced leakage tendency.
• Excellent load carrying capability and shock load resistance.
• Good sealing properties in dusty conditions.
• Inherent adhesive nature.
Can be applied manually, or by using a standard grease gun (400gm cartridges available).
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer.
Typical Test Data Product Profile
Base Oil -
Semi
Synthetic
Base Oil Viscosity (cSt) @ 40°C - 950
Colour - Black
Dropping Point (°C) - 280
Four Ball Weld Load (Kg) - 550
NLGI Classification - 2/ 3
Thickener - Inorganic
Solids Content (%) - 10
Worked Penetration 0.1mm - 230 to 260
Working Temperature range °C - -5 to 160
Working temperature up to 600°C as a dry film
lubricant.
Manufacturer | Aztec |
---|---|
Weight | 20.000000 |
Country of Manufacture | United Kingdom |
Write Your Own Review