BUY ANDEROL 783-00 FOOD GRADE SPRAY GREASE x 400ml (Box of 12)
BUY ANDEROL 783-00 FOOD GRADE SPRAY GREASE x 400ml (Box of 12)
£124.30
SKU
and78300spray
- Buy 2 for £117.76 each and save 5%
- Buy 5 for £111.22 each and save 11%
- Buy 10 for £13.09 each and save 89%
BUY ANDEROL 783-00 FOOD GRADE SPRAY GREASE x 400ml (Box of 12)
ANDEROL 783-00 SPRAY is a synthetic hydrocarbon (PAO) based aluminum complex thickened grease designed for use in food processing machinery. It is a non-toxic, high quality general purpose grease especially suitable for cold temperature applications.
The semi-fluid grease has been dissolved and put in a spray device so it can be used as aerosol.
ANDEROL 783-00 is NSF/H1 and InS/H1 registered. The product is certified Kosher by the Orthodox Union and Halal by the Islamic Food Council of Europe.
ANDEROL Food Grade Lubricants meet the requirement of the FDA regulation 21 CFR 178.3570
Easy application
Good penetration
Excellent wear protection
High and low temperature applications
Good mechanical stability
Resistant to water penetration
Roller and friction bearings in food and beverage, cosmetic and pharmaceutical industries.
Grease lubricated points in can seaming and bottling.
Corrosion protection.
Easy to use in difficult reachable places.
Operating temperature range for long-term
Lubrication : -45 to +160 °C
Short time admissible temperature peak Value : +200 °C
ANDEROL synthetic hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and hoses.
When changing over from other grease types contact our Technical department and ask for
the grease compatibility guide and change over procedure.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
ANDEROL BV
Groot Egtenrayseweg 23
5928 PA VENLO
The NETHERLANDS
Tel No.: +31 (0)77 396 03 40
Fax No.: +31 (0)77 396 03 49
www.anderol-europe.com
APPROVALS / REGISTRATIONS
ADVANTAGES / BENEFITS COMPATIBILITY APPLICATION
PROPERTIES TEST METHOD ANDEROL 783-00
Spray
Appearance @ 20°C
Thickener
Type of Base Oil
Dropping Point, °C
Worked Penetration
Base Oil viscosity, cSt @ 40 °C
Water Resistance
Corrosion Protection
4-Ball Weld Load, N
Designation
Visual
ASTM D-2265
ASTM D-217
ASTM D-445
DIN 51.807-01
IP 220/85
DIN 51.350
DIN 51.502
White Semi-Fluid
Al-complex
Synthetic (PAO)
>250
400 to 430
350
0-90
Corrosion degree 0/0
2400
GPFHC 00 P-40
Weight | 5.000000 |
---|---|
Manufacturer | Anderol |
Country of Manufacture | Netherlands |
Write Your Own Review