BUY Kluber Paraliq GTE 703 x 60 gms (Box of 25)

BUY Kluber Paraliq GTE 703 x 60 gms (Box of 25) Synthetic lubricating grease for valves & fittings with EPDM seals. A reduction in your lubricant inventory with one lubricant which can be considered for both seals and rolling bearings. Good compatibility when coming in contact with EPDM seals or even beer foam enhancing seal life and reduction in down time. High resistance to many types of media such as disinfectants, cleaning agents, water, steam ensuring maximum protection of both seals and bearings , enhancing life and operating cost reduction. NSF H1 registered supporting process reliability and approved according to WRAS PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE. The product is registered as NSF H1and complies with FDA 21 CFR § 178.3570. Besides for seals, PARALIQ GTE 703 may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required. Very low load applications with a C/P ratio of >30 and slow speeds. PARALIQ GTE 703 is resistant to hot and cold water,disinfectants, cleaning agents and steam. When applied properly, it does not impair the formation of froth or the taste of beer. The German testing laboratory for beverage dispensing taps in Gräfelfing, Germany, confirmed that PARALIQ GTE 703 meets all requirements for a sealing grease in dispensing units. Application PARALIQ GTE 703 is a special grease suitable for beer taps,barrel filling installations and valves. It can be used for the lubrication of seals in the beverage industry whenever a H1 lubricating grease compatible with EPDM is required.