BUY ANDEROL FGCS-2 x 180 kgs
BUY ANDEROL FGCS-2 x 180 kgs
CURRENT AVAILABILITY : 3 WEEKS FROM RECEIPT OF ORDER
£2,340.36
SKU
andfgcs2180
- Buy 2 for £1,989.31 each and save 15%
- Buy 4 for £1,833.29 each and save 22%
BUY ANDEROL FGCS-2 x 180 kgs
ANDEROL FGCS 2 is an over-based Calcium Sulfonate based grease with exceptional load carrying ability, excellent mechanical stability and good resistance to oxidation and corrosion.
ANDEROL FGCS 2 equals or outperforms other premium Food-Grade greases.
CURRENT AVAILABILITY : 3 WEEKS FROM RECEIPT OF ORDER
APPLICATIONS / ADVANTAGES REGISTRATIONS / APPROVAL HANDLING AND STORAGE
Superior mechanical stability, particularly in the presence of heat and water formulated to resist separation under centrifugal forces.
Excellent rust prevention properties
Excellent load carrying ability and wear protection
Excellent resistance to water washout and spray-off
H1 grease for incidental contact with food
Heavy duty food-grade applications
Life performance is typically increased by two to three that of a regular mineral oil based grease
ANDEROL lubricants are approved,recommended and field tested by many OEM’s in the Food processing,bottling, canning, meat processing and pharmaceutical industries.
.
ANDEROL lubricants generally present little hazard in normal handling if ordinary care is exercised. If spilled, cover with inert,absorbent material and remove. Flush the area with water.
Although ANDEROL lubricants are not highly flammable, they will burn and should be kept away from open flames. In case of fire, use water spray, foam, carbon dioxide, or dry chemical.
ANDEROL lubricants should be stored preferably in protected locations to prevent contamination. Do not re-use drums; flush and send to re-conditioner.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Punterweg 21 A
6222 NW MAASTRICHT
The NETHERLANDS
Tel No.: +31 (0)43 352 41 90
Fax No.: +31 (0)43 352 41 99
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL FGCS-2
Thickener
Color
Type of Base Oil
Operating temperature for long-term lubrication, °C
Short term admissible temperature peak value, °C
Dropping Point, °C
Worked Penetration
Base Oil Viscosity at 40°C
4-Ball Weld Load
Water Washout @ 80°C
Bearing Life Performance, hours @ 1000 rpm, 160°C
Low Temperature Torque at -40°C
Designation
DIN ISO 2176
DIN ISO 2137
DIN 51.562
ASTM D-2596
ASTM D-1264
ASTM D-3527
ASTM-D-4693
DIN 51.502
Ca-Sulfonate
Tan
White Oil
-20 to 160 °C
+200°C
318°C
265 to 295 0.1 mm
Approx. 95 mm²/s
4000 N
0.3% removed
180 hours
11.0 Nm
KP 2 U-40
Weight | 200.000000 |
---|---|
Manufacturer | Anderol |
Country of Manufacture | Netherlands |
Write Your Own Review