BUY ANDEROL 783-00 x 180 kgs
BUY ANDEROL 783-00 x 180 kgs
CURRENT AVAILABILITY : 3 WEEKS FROM RECEIPT OF ORDER
£2,610.12
SKU
and78300180
- Buy 2 for £2,544.70 each and save 3%
- Buy 4 for £2,479.29 each and save 5%
BUY ANDEROL 783-00 x 180 kgs
ANDEROL 783-00 is a synthetic hydrocarbon (PAO) based aluminum complex thickened grease designed for use in food processing machinery. It is a non-toxic, high quality general purpose grease and can satisfy a wide variety of applications, even under high temperatures, high loads and water exposure. This product is NSF/H1 and InS/H1 registered for use in applications where incidental food contact can occur.
CURRENT AVAILABILITY : 3 WEEKS FROM RECEIPT OF ORDER
APPLICATIONS / ADVANTAGES REGISTRATIONS / APPROVAL HANDLING AND STORAGE
Lubrication of roller and friction bearings in food and beverage, cosmetic and pharmaceutical industry.
High temperatures, high loads and water exposure.
High quality general-purpose food grade grease.
Grease lubricated points in can seaming and bottling
Excellent wear protection
Prevents Rusting
Good mechanical stability.
ANDEROL lubricants are approved,recommended and field tested by many OEM’s in the food processing, bottling, canning, meat processing, and pharmaceutical industries.
ANDEROL and PQ Food Grade Lubricants are registered by NSF International (www.nsf.org) and meets USDA 1998 Guidelines.
ANDEROL Food Grade lubricants also meet the certification requirements recommended by the National Lubricating Grease Institute (NLGI) and the European Lubricating Grease Institute (ELGI)
ANDEROL lubricants generally present little hazard in normal handling if ordinary care is exercised. If spilled, cover with inert,absorbent material and remove. Flush the area with water.
Although ANDEROL lubricants are not highly flammable, they will burn and should be kept away from open flames. In case of fire, use water spray, foam, carbon dioxide, or dry chemical.
ANDEROL lubricants should be stored preferably in protected locations to prevent contamination. Do not re-use drums; flush and send to re-conditioner.
FOR MORE INFORMATION PLEASE REFER TO THE RELEVANT MATERIAL SAFETY DATA SHEET
APPROVALS / REGISTRATIONS
ANDEROL BV
Groot Egtenrayseweg 23
5928 PA VENLO
The NETHERLANDS
Tel No.: +31 (0)77 396 03 40
Fax No.: +31 (0)77 396 03 49
www.anderol-europe.com
This information is furnished without warranty, representation, inducement, or license of any kind except that it is accurate to the best of OUR knowledge or obtained from sources believed by ANDEROL to be accurate. ANDEROL does not assume any legal responsibility for use of reliance upon it. Only Chemists or chemically qualified lab technicians should carry out tests. Before using any chemicals, read its label and Material Safety Data Sheet.
PROPERTIES TEST METHOD ANDEROL 783-00
Thickener
Color
Type of Base Oil
Operating temperature for long-term lubrication
Short time admissible temperature peak value
Dropping Point
Worked Penetration
Base Oil Viscosity at 40° C
Water resistance
Corrosion Protection
4 Ball-test welding load
Designation
ASTM D-2265
ASTM D-217
ASTM D-445
DIN 51.807-01
IP 220/85
DIN 51.350
DIN 51.502
Al-complex
White
Synthetic (PAO)
-45 to +160° C
+200° C
>250° C
400 to 430
350 mm²/s
0-90
Corrosion degree 0/0
2400 N
GPFHC 00 P-40
Weight | 200.000000 |
---|---|
Manufacturer | Anderol |
Country of Manufacture | Netherlands |
Write Your Own Review